Makita DCS4600SH Chainsaw Manual

The Makita DCS4600SH is a powerful chainsaw designed for professional use, featuring a 46cc engine, a 20-inch guide bar, and advanced anti-vibration technology. It is ideal for cutting firewood, felling trees, and other heavy-duty tasks. Below are key sections for safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key components: 46cc engine, 20-inch guide bar, automatic chain lubrication, and easy start system.

Feature	Description
Engine	46cc 2-stroke engine for high performance
Guide Bar	20-inch bar for cutting larger logs
Chain Lubrication	Automatic oiling system for smooth operation
Anti-Vibration	Reduces operator fatigue during extended use
Weight	Lightweight design for easy handling
Safety Features	Chain brake and throttle lock for user safety

Safety Information

Always wear appropriate safety gear, including gloves, goggles, and hearing protection. Ensure the area is clear of obstacles before operating the chainsaw.

Read the manual thoroughly before use.
Inspect the chainsaw for damage before each use.
Keep hands and feet away from the cutting area.
Do not operate in wet conditions.

WARNING! Failure to follow safety instructions may result in serious injury.

Operation Instructions

To start the chainsaw, ensure the chain brake is engaged, pull the choke, and use the starter rope. Once started, disengage the chain brake and begin cutting.

Check fuel and oil levels before starting.
Engage the chain brake before starting.
Start the engine and allow it to warm up.
Use a steady motion when cutting.

CAUTION! Always maintain a firm grip and proper stance while operating.

Specifications

Engine Type: 2-stroke, air-cooled.
Displacement: 46cc.
Guide Bar Length: 20 inches.
Fuel Tank Capacity: 0.5 liters.
Oil Tank Capacity: 0.25 liters.
Weight: 5.5 kg.
Chain Speed: 13.5 m/s.

Maintenance

Regular maintenance is essential for optimal performance. Clean the air filter, check the chain tension, and replace the chain as needed.

Clean the air filter after every 5 hours of use.
Check chain tension before each use.
Sharpen the chain regularly for efficient cutting.
Store in a dry place when not in use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Fuel issue	Check fuel level and quality; ensure choke is set correctly.
Chain not moving	Chain tension	Adjust chain tension; check for obstructions.
Excessive vibration	Loose parts	Tighten screws and bolts; check for damage.
Oil leaking	Seal damage	Inspect seals and replace if necessary.

Reset: Refer to the manual for reset instructions if available.

Service: Contact Makita customer service for assistance.