Makita EA3502S40B Chainsaw Manual

The Makita EA3502S40B is a powerful and efficient chainsaw designed for both professional and home use. It features a 35cc engine, a 14-inch guide bar, and a lightweight design for easy handling. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key features include a powerful 35cc engine, automatic chain lubrication, and a tool-less chain adjustment system for convenience.

Feature	Description
Engine	35cc 2-stroke engine for efficient cutting
Guide Bar	14-inch guide bar for versatile cutting
Weight	Lightweight design for easy maneuverability
Chain Lubrication	Automatic lubrication system for smooth operation
Chain Adjustment	Tool-less chain adjustment for quick changes

Safety Information

Always wear appropriate safety gear, including gloves, goggles, and hearing protection. Ensure the area is clear of obstacles before operating the chainsaw.

Read the manual thoroughly before use.
Keep hands and feet away from the cutting area.
Do not operate in wet conditions.
Ensure proper footing and balance while cutting.

WARNING! Failure to follow safety instructions may result in serious injury.

Operation Instructions

To start the chainsaw, ensure the chain brake is engaged, then follow the starting procedure outlined in the manual.

Engage the chain brake.
Set the choke to the closed position.
Pull the starter rope until the engine fires.
Adjust the choke to the open position and pull the starter rope again.
Release the chain brake to begin cutting.

CAUTION! Always check the chain tension before use.

Specifications

Engine Displacement: 35cc
Guide Bar Length: 14 inches
Weight: 9.7 lbs
Fuel Type: 50:1 gas/oil mix
Chain Type: Low profile chain for safety
Chain Speed: 13.5 m/s
Oil Tank Capacity: 0.2 liters

Maintenance

Regular maintenance is essential for optimal performance. Clean the air filter, check the spark plug, and ensure the chain is properly lubricated.

Inspect the chain and guide bar for wear.
Clean the air filter every 10 hours of use.
Sharpen the chain as needed.
Store in a dry place when not in use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Fuel issues	Check fuel level and mixture; ensure choke is set correctly.
Chain not moving	Chain brake engaged	Release the chain brake to allow movement.
Excessive vibration	Worn chain or bar	Inspect and replace if necessary.
Oil leaking	Damaged oil tank	Inspect for damage and replace if needed.

Reset: Refer to the manual for reset procedures if applicable.