Makita UC002G Chainsaw Manual

The Makita UC002G is a powerful cordless chainsaw designed for efficient cutting and trimming. It features a brushless motor for longer run time and increased power, a 16-inch guide bar, and a lightweight design for easy handling. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. First-Time Setup 4. Specifications 5. Operating Instructions 6. Maintenance 7. Troubleshooting 8. Warranty Information

Features at a Glance

Key components: Brushless motor, 16-inch guide bar, automatic chain lubrication, tool-less chain tensioning, and ergonomic design.

Feature	Description
Brushless Motor	Provides longer run time and increased power.
16-inch Guide Bar	Ideal for cutting and trimming tasks.
Automatic Chain Lubrication	Keeps the chain lubricated for optimal performance.
Tool-less Chain Tensioning	Allows for quick and easy chain adjustments.
Ergonomic Design	Lightweight and easy to handle for extended use.

Safety Information

Always wear appropriate personal protective equipment (PPE) including gloves, goggles, and hearing protection. Ensure the work area is clear of obstacles and bystanders.

Read the manual thoroughly before use.
Inspect the chainsaw for damage before operation.
Keep hands and feet away from the cutting area.
Do not operate in wet conditions.

WARNING! Failure to follow safety instructions may result in serious injury.

First-Time Setup

Charge the battery fully before first use. Attach the guide bar and chain according to the instructions.

Install the guide bar and chain.
Fill the oil reservoir with chain oil.
Charge the battery using the provided charger.
Check chain tension before use.

CAUTION! Ensure the chainsaw is turned off during setup.

Specifications

Model: Makita UC002G.
Bar Length: 16 inches.
Motor Type: Brushless.
Battery Voltage: 40V.
Weight: 10.5 lbs.
Chain Speed: 0-3,940 FPM.
Lubrication: Automatic chain lubrication.

Operating Instructions

To operate the chainsaw, ensure the battery is charged and installed. Use the trigger to start the motor and begin cutting.

Hold the chainsaw firmly with both hands.
Press the trigger to start the motor.
Guide the chainsaw through the material to be cut.
Release the trigger to stop the motor.

WARNING! Always maintain a firm grip and be aware of your surroundings while operating.

Maintenance

Regular maintenance is essential for optimal performance. Clean the chainsaw after each use and check for wear on the chain and bar.

Clean the air filter regularly.
Sharpen the chain as needed.
Check chain tension before each use.
Replace the chain if it shows signs of damage.

CAUTION! Always disconnect the battery before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chainsaw won't start	Battery not charged	Charge the battery and try again.
Chain not moving	Chain tension too loose	Adjust the chain tension.
Excessive vibration	Chain dull or damaged	Sharpen or replace the chain.
Oil leaking	Oil reservoir overfilled	Drain excess oil and check seals.

Service: For further assistance, contact Makita customer service.