Makita UC013G Chainsaw Manual

The Makita UC013G is a powerful and efficient chainsaw designed for both professional and home use. It features a brushless motor, automatic chain lubrication, and a lightweight design for easy handling. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Brushless motor, automatic chain lubrication, lightweight design, ergonomic handle, and safety features.

Installation

Unpack and inspect contents. Ensure all parts are included and undamaged.

1. Attach the guide bar and chain: Follow the instructions in the manual.
2. Fill the oil reservoir: Use the recommended chain oil.
3. Check battery charge: Ensure the battery is fully charged before use.
4. Inspect safety features: Ensure all safety mechanisms are functional.

WARNING! Always wear protective gear when operating the chainsaw.

First-Time Setup

Power on the chainsaw; follow the on-screen prompts if applicable.

1. Check chain tension: Adjust if necessary before first use.
2. Set up safety features: Ensure chain brake is functional.
3. Familiarize with controls: Review all buttons and switches.
4. Test operation: Run the chainsaw briefly to ensure proper function.

CAUTION! Ensure stable footing and a clear work area.

Specifications

• Motor Type: Brushless electric motor.
• Bar Length: 13 inches.
• Chain Speed: 15 m/s.
• Battery Voltage: 40V.
• Weight: 3.5 kg (7.7 lbs).
• Oil Reservoir Capacity: 200 ml.
• Noise Level: 89 dB.
• Vibration Level: 3.5 m/s².

Controls and Settings

Access controls via the main handle. Key controls include power switch, chain brake, and oil reservoir cap.

Safety Features: Chain brake, safety switch, and low kickback chain.

Adjustments: Chain tension can be adjusted using the tensioning screw located on the side of the guide bar.

Connecting Devices

This chainsaw does not require external connections; it operates on a rechargeable battery.

1. Ensure the battery is properly inserted.
2. Check for any loose parts before operation.
3. Do not connect to any external power sources.

Tip: Always store the battery in a cool, dry place when not in use.

Operating the Chainsaw

Follow these steps to operate the chainsaw safely:

1. Power on the chainsaw using the main switch.
2. Ensure the chain brake is disengaged before cutting.
3. Hold the chainsaw firmly with both hands.
4. Make smooth, controlled cuts; do not force the saw.
5. Engage the chain brake immediately after use.

WARNING! Always be aware of your surroundings and avoid cutting overhead.

Maintenance and Care

Regular maintenance is essential for optimal performance.

1. Clean the chainsaw after each use.
2. Check and adjust chain tension regularly.
3. Inspect the chain for wear and replace if necessary.
4. Keep the oil reservoir filled with the recommended oil.

CAUTION! Always unplug the battery before performing maintenance.

Safety Information

Always wear appropriate safety gear, including gloves, goggles, and hearing protection.

WARNING! Keep hands and body away from the cutting area.

Regulatory Information

This chainsaw complies with all applicable safety standards. For support, visit www.makitatools.com or contact customer service.

Troubleshooting

Reset: If applicable, follow the reset procedure in the manual.

Service: For service inquiries, contact Makita customer support.